Error with the shield
1. When this warning triangle lights up red, it may mean that the lawnmower has been lifted or is stuck. Ensure that the lawnmower is on a flat surface and is not blocked by anything.
2. Use a screwdriver to remove the four screws that hold the shield in place.
3. Once the shield is removed, inspect the area for any metal objects such as screws or other small parts that may have fallen onto the bump sensor magnets. These can interfere with the lawnmower's function.
Remove any foreign objects and ensure that the magnets and sensors are clean and free from dirt.
4. After you have checked and cleaned the area, replace the shield and secure it with the four screws.