Advanced settings
Settings for your robot.
Device parameters
Under this menu, you will find the device information, including model name and serial number, as well as information about the machine's total run time and battery status. It is also possible to change the lawnmower's name and reset the PIN code, as long as there is a Wi-Fi connection to the machine.
Start point settings
Activate or deactivate the start point settings here. More information can be found in the manual.
Rain delay
The robot has a rain sensor on the top, which is activated by default with a 3-hour delay. You can turn it off or adjust the delay. When the sensor is dry, the countdown starts automatically. For more information on cleaning the rain sensor and settings, see the manual.
As soon as the robots detect rain, they navigate to the charging station.
When the sensor is dry, the countdown starts automatically. For more information on cleaning the rain sensor and settings, see the manual.
Connect to Wi-Fi
Here you can connect to your wifi network (only 2.4GHz network). More information in the manual.
Time calibration
It is recommended to keep time calibration enabled; when the lawnmower connects to Wi-Fi or an app, the robot's time is automatically calibrated.
Firmware update
This is the OTA - over-the-air update page, also known as firmware update. When automatic updates are enabled, the robot will always have the latest version. Updating the robot software is important as it fixes bugs in the robot with each update. The lawnmower will automatically download the software and update outside of the scheduled run time (for example at night) if the device is online.
Help Centre
Manual – Always find the latest manual for the lawnmower here.
Product introduction – Watch a guide video on installing the robotic lawnmower.
Contact service – Contact Schou Company A/S robot service department directly via email.
Winter storage and winter – Order storage and winter service for your robotic lawnmower here.