• The start point function is suitable for gardens with many areas or narrow passages
• For example, the start point can be set to 15%, 30%, 60%, 75%.
• The percentage here refers to the percentage of the total length of the boundary line
• On the scheduled date, the machine will first follow the boundary line 15% of the total length of the boundary line, and then make a sound and start cutting from here
• After completing a full cut, the machine will return to the charging station. When the charging station is fully charged, the robot will again travel 30% along the boundary line, and then make a sound and begin cutting from 30% of the total length of the boundary line
• The same applies for the third and fourth time.
• After completing 4 cycles, the machine will start from start point 1 again.
• Note: If the robot is turned on in manual mode, the robot will not perform this function. Only when the robot automatically leaves the charging station within the scheduled time will the robot go to the start point.