Insect-damaged charging station for robotic lawn mower
Introduction
Insects can cause problems in the robotic lawn mower's charging station by building nests or leaving debris. Follow these steps to inspect, clean, and prevent insect-related issues.
Step 1: Safety first
- Turn off the robotic lawn mower and unplug it from the charging station, so there is no power connected.
Step 2: Inspect the charging station
- Carefully open the charging station (To open the charging tower, simply remove the round nuts, and you will find two clips, one on each side. Press them and then lift the lid up) and check for:
- Signs of insects, such as nests or dead insects.
-
- Debris blocking connections or ventilation.
- Visible damage to electrical components.
Step 3: Clean the charging station
- Clean the charging station to remove debris and insects.
- Clean the charging contacts with a dry, lint-free cloth.
- Avoid using water or liquid cleaners.
Step 4: Assess damage
- Check if any electrical contacts are corroded, damaged, or burnt.
- If there is visible damage to electrical components or burnt plugs, they should be replaced.
- Contact customer service for assistance.
- You can also order spare parts through our webshop at Schou.com
Step 5: Prevent future problems
- Place the charging station in a shaded area away from places with many insects.
- Consider using insecticides in the area around the charging tower.