Using the app and setting the mowing time
Home screen
The app offers more features than the robot's display. Here are the main ones.
Home
When logged in and after pressing on the robot, you are on the home screen, where you have an overview of the robot, its battery status, whether it has a Wi-Fi/Bluetooth connection, and whether the robot is in standby mode or running.
Further down, there are 3 round buttons: RETURN – WORK – STOP
If the robot is in operation and you wish to return it to the starting position, you must first press STOP and then "RETURN".
To start the robot manually, you must first press STOP (so the WORK button turns white) and then press "WORK".
In general, the STOP button should be pressed first before you can choose "RETURN" or "WORK".
Schedule
Under "schedule", you can see scheduled mowing times and set when the robot should run.
Press "Edit" to modify the schedule.
- Press on the day of the week you wish to set the robot to run.
- Then select the start time and end time and press "Confirm".
- Edge mowing: In the top line "edge" (under "Edit"), a blue tick can be set if the robot should edge mow the first time it starts. The robot will then follow the boundary wire all the way around and mow along it (note that the robot will still leave an uncut edge of grass, as the blade cannot cut all the way to the edge for safety reasons).
- If the robot is started manually via START + OK on the display, it will not edge mow.
- To avoid track marks, it is recommended to only select "edge" a few days a week.
- Press "Save" when the schedule is complete.
- If you have a large lawn, the robot should run more often than if the lawn is smaller.
- If the lawn is close to the robot's maximum capacity, it will likely need to run every day for longer periods. The layout of the lawn also affects how much the robot needs to run to keep the grass down. A single square lawn without obstacles is quicker to mow compared to a lawn with narrow passages and many obstacles, as the robot will need to spend more time stopping and changing direction.
It is recommended to experiment and observe the result of the mowing on the lawn. The robot should not run more than necessary to avoid track marks in the lawn. During the growing season and when it rains a lot, it should run more often than in dry periods.
At certain times, the grass is damp early in the day and late in the day. Afternoon is typically the best time.
Schedule overview
Set edge mowing
Set time