Setting up the robotic lawn mower - Adano 800WL 800m2

1. Running time per charge:

1.  
   • The machine's running time depends on the load. A low cutting height (e.g. 20mm) uses more power.
   • The recommended cutting height is 40mm for both a neat result and longer running time.

2. Cutting height and cutting time:

1.  
   • After 7 days, you should measure the results to ensure that the machine has covered the entire lawn.
   • If the machine leaves tufts, the cutting time should be adjusted so that the machine can cover the lawn in a week.
   • Keep the machine updated to optimise the start time.

3. Setting the time and date: 

1.  
   • If the machine is not running as scheduled, it may be due to incorrect time and date settings. This can be changed under settings.

4. For the S-model:

1.  
   • Enter the PIN code and press "OK".
   • Press "Set Worktime" and select the desired number of hours, then press "OK".
   • Press "Start" and "OK" to set the start time, e.g. at 9 am.